Product Information

 Register Once for
 custom product info


 

ML7041
Audio CODEC
 

Documents Applications Description Block Diagram Features

Documents

»  PDF of this Data Sheet (828 KB) is available. ML7041.pdf

Applications

»  Telecom
»  Switch

Description

The ML7041 is a single channel,low-voltage linear Codec targeting the digital handset market including CDMA and TDMA applications.The ML7041 sets a new standard for functionality by incorporating all major peripheral handset features, including speaker driver,tone generator, and voice detection circuits. The ML7041, a third generation Oki linear Codec, offers an improved feature set by incorporating a robust amplifier circuit capability on-chip to drive the latest cutting-edge, low-impedance dynamic speakers commonly used in handsets.

The ML7041 applies an Oki application-specific DSP architecture to improve the filtering performance and generate telephony tones. Applying an optimized DSP core on-chip allows sigma-delta post-equalization processing,which improves signal-to-noise while lowering power consumption.

The ML7041 design concept is based on an advanced Oki 0.45-um double-poly CMOS process providing sufficiently low transistor threshold voltages to allow 2.4-V operation to maximize a handset ’s battery life.

Oki ’s linear CODEC provides a flexible user interface for two microphone,one headset,two general-purpose inputs and a speaker output with on-chip adjustable gain control. The ML7041 will unburden the external,baseband DSP engine by generating all common telephony tones such as DTMF,side,and information tones. An added feature is the new integrated transmit voice detection scheme (VOX)which no longer requires firmware support on the CDMA chipset.

   

Block Diagram


 

Features

»  Single 3-V Power Supply Operation:VDD:2.4 V to 3.3 V for increased battery life
»  Coding format:PCM µ-law / PCM A-law / 14-bit linear mode selectable, provides flexibility
»  PCM interface timing:Long frame and short frame synchronous timing simplifies interface
»  Transmit / receive full-duplex operation
»  Serial PCM transmission data rate:64 kbps to 2048 kbps
»  Low Power Consumption
»  Operating Mode:15 mW typ.(VDD=3.0 V)
»  Power-Down Mode:3 µW typ.(VDD=3.0 V)
»  Master Clock Frequency:2.048 MHz
»  Integrated high-gain Analog Output Stage:100 mW (differential)amplifier output for driving receiver speaker
»  Capable of driving an 8-W load.
»  Integrated Analog Output Stage:6.6 mW (single-ended)amplifier output for driving earphones speaker
»  Capable of driving a 32-W load.
»  Built-in dual low-dropout regulator (150 mAx2) supports microphone and headset
»  Built-in quad general purpose driver (150 mAx4) supports hands-free and other connections
»  Transmit/receive mute, transmit/receive programmable gain control
»  Built-in side tone path eliminates external ICs
»  Built-in DTMF tone generator eliminates external DSP
»  Selectable transmit slope filter allows frequency fine tuning
»  Popular I 2 C interface to popular processors lowers pin counts
»  Built-in transmit voice signal detector provides VOX functionality
»  Package:
48-pin plastic TQFP (TQFP48-P-0707-050-K)