Documents
| » |
32-Bit ARM® Based General Purpose Microcontrollers ML675K Series |
Description
Oki's ML675k Starter Kit is an evaluation and development kit for creating and debugging embedded application programs for Oki's ML67Q5001/Q5002/Q5003 series of 32-bit ARM-based microcontrollers (MCUs). The Starter Kit provides a cost effective platform for software design and development, MCU evaluation, and much more. This board supports standard JTAG, as well as stand-alone debugging modes.
The Starter Kit board provides an ample array of memory, communication ports, signal headers, user switches, and LEDs. The JTAG port facilitates hardware debug-connectivity for standard ARM development tools. The connectors available on the board make all the signals of the on-board MCU accessible for test probing or for easy interface to a separate target board.
Order Part Number ICD-SK(ML675K-SK-1).
ML675k Starter Kit
| Microcontroller |
ML67Q5003 |
| Power supply jacks |
Input voltage of +5 V DC |
| Operating Frequency |
60 MHz ML67Q5003 board |
| Operating voltage |
3.3 V / 2.5 V DC |
| Memory |
512 KB of external SRAM |
| 512 KB of Flash (internal MCU Flash-ROM) |
| 32 KB (internal MCU RAM) |
| 8 MB of external SDRAM |
| 2 MB of external Flash |
| JTAG interface |
Facilitates debug by connecting to an ARM Debugger |
| Standard 20-pin connector for JTAG adapter |
| RS-232C interface |
2 DB9 connectors |
| Ethernet interface |
RJ-45 connector for 10/100 Ethernet |
| Signal interface |
Four 30-pin, .1" connectors |
| Push-button input switch |
3 on-board push-button switches for EXTINT0, FIQ, Reset |
| Operating mode jumpers |
4 Jumpers select PLL clock mode and Memory Mapping |
| LED display |
7-segment LED |
| LED indicators |
Power, 3 Ethernet status indicators |
| Dimensions |
4" x 4" |
| Accompanying software |
Sample programs for setting up and using all of the peripherals of the MCU and additional modules and docs for software development. Also, a serial flash utility with user-friendly Windows GUI is provided for programming the internal flash of Oki MCU through the serial port. |
| Accessories |
Serial RS232 cable, Ethernet cable, 5 V-2 A power supply, CD ROM containing: documentation, sample codes and soft info | |
