Product Information
 Register Once for
 custom product info

 

ML67Q5003 CPU-Board
ML67Q5003 CPU-Board
 

Documents

È  PDF of this User's Manual (295 KB) is available. ML67Q5003_CPU-Boards.pdf
È  ML675001/ML67Q5002/ML67Q5003 32-Bit ARM¨ -Based General Purpose Microcontrollers. ML675K Series

Description

The Oki ML67Q4003/MLQ675003 CPU-Board are versatile, feature rich tools that enable real-time code development on and evaluation of Oki advantage microcontrollersª. These boards provide a time-saving ready-to-use, fully tested and proven platform for evaluation, software development and prototype designs.

The connectors available on the board make all the signals of the on-board MCU accessible for easy interface to a target board or test probing.

These CPU-boards are designed to support the Oki ML674001 and ML675001 series of pin-compatible advantage MCUs. The ML67Q5003 CPU-board which features the ML67Q5003 MCU on-board, supports the ML675001, ML67Q5002 and ML67Q5003 MCUs. This board has a 60 MHz crystal oscillator on-board.

Order Part Number ICD-SK(67Q5003CPUBOARD-3).

The ML674003 CPU-board which features the ML67Q4003 MCU on-board supports the ML674001, ML67Q4002 and ML67Q4003 MCUs. This board has a 33 MHz crystal oscillator on-board.

Order Part Number ICD-SK(67Q4003CPUBOARD-4).


   

Oki ML674003/ML675003 CPU-Board

   

Oki ML67Q5003 CPU-Board Features

Microcontroller ML67Q4003 or ML67Q5003
Control Interfaces RS-232C and JTAG
Power supply jacks Input voltage of +5 V DC
Operating voltage 3.3 V / 2.5 V DC
MCU Operating frequency 33 MHz ML67Q4003 board
60 MHz ML6Q75003 board
Memory 512 KB of external SRAM
512 KB of Flash (internal MCU Flash-ROM)
32 KB (internal MCU RAM)
8 MB of external SDRAM
CPLD Used as general logic for memory remap and etcÉ
JTAG interface Facilitates debug by connecting to an ARM Debugger
Standard 20-pin connector for JTAG adapter
RS-232C interface Two RS232 ports selectable through single DB9 interface
Target/test interface Eight 40-pin target/test connectors
Push-button input switch 3 on-board push-button switches for EXTINT0, FIQ, Reset
Operating mode switch 16 switches control boot modes, memory map and various other operating options
Clock input select switch Choice of onboard clock or externally user supplied clock
LED indicator 7-segment LED
Other LED indicator for power
Accessories Power cable, RS-232C cable, Documentation and sample source code CD,