Product Information

 Register Once for
 custom product info


 

MSM6636B
SAE-J1850 Multiplex Communication Protocol Conformity Transmission Controller for Automotive LAN
 

Documents

»  PDF of this Data Sheet (103 KB) is available. msm6636b.pdf
»  THOMAS is a LAN monitor system for a serial communication multiplex bus. THOMAS Manual

Description

The MSM6636B is a transmission controller for automotive LAN based on data communication protocol SAE-J1850. This device can realize a data bus topology bus LAN system with a PWM bit encoding method (41.6 kbps). In addition to a protocol control circuit, MSM6636B has an enclosed quartz oscillation circuit, host CPU interface (parallel interface), a transmit / receive buffer, and a bus receiver circuit that decreases the burden on the host CPU.

   

Features

»  Based on SAE-J1850 CLASS B DATA COMMUNICATION NETWORK INTERFACE (issued August 12, 1991)
»  Non-destructive collision and priority control using CSMA / CD
»  Internal transmit buffer (1 frame) and receive buffer (2 frames)
»  Modulating/demodulating: PWM (Pulse Width Modulation)
»  Transmission speed: 41.6 kbps
»  Multi-address setting with physical addressing: 1 type / functional addressing: 15 types
»  Address filter function by multi-addressing (broadcasting possible)
»  Automatic retransmission function by arbitration loss and non ACK
»  Three types of in-frame response support:
»  Single-byte response from a single node
»  Multi-byte response from a single node (with CRC code)
»  Single-byte response from multiple nodes (ID response as ACK)
»  Error detection by cyclic redundancy check (CRC)
»  Various communication error detections
»  Dual-wire bus abnormality detection by internal bus receiver and fault tolerance function
»  Host CPU interface is accessed in parallel
»  Sleep function
Low current consumption mode by oscillation stop (IDS Max < 50µA) SLEEP / WAKE UP control from host CPU, WAKE UP via LAN bus
»  Package:
24-pin plastic SOP (SOP24-P-430-1.27-K) (Product name : MSM6636BGS-K)