Users Manual
Documents
| » |
PDF of user's manual available upon request. |
| » |
CAN Controller IC ML9620 |
| » | CAN Protocol Controller LSI ML9620 Product Introduction Sheet |
Description
The ML9620 is a microcontroller peripheral LSI which conforms to the CAN protocol for high-speed LANs in automobiles. The CAN Control performs communication according to the CAN protocol version 2.0 part B/Active. The bit rate can be programmed to values up to 1MBit/s depending on the used technology. For the connection to the physical layer additional transceiver hardware is required. For communication on a CAN network, individual Message Objects (see chapter 2.3.5) are configured. The Message Objects and Identifier Masks for acceptance filtering of received messages are stored in the Message RAM.
| » | Supports CAN protocol version 2.0 part A and B |
| » | Bit rates up to 1 M Bit/s |
| » | 32 Message Objects |
| » | Each Message Object has its own identifier mask |
| » | Each Message Object has its own direction mask |
| » | Each Message Object has its own extended mask |
| » | Each Message Object has its own New Data flag |
| » | Each Message Object has priority by the Message Object number |
| » | Programmable FIFO mode (concatenation of Message Objects) |
| » | Maskable interrupt |
| » | Error control: Bit error/stuff error/CRC error/form error/acknowledgment error detection functions Retransmission/error status monitoring function when error occurs Bit error flag/stuff error flag/CRC error flag/form error flag/acknowledge error flag are provided |
| » | Programmable loop-back mode for self-test operation |
| » | Disabled Automatic Retransmission mode for Time Triggered CAN applications |
| » | Programmable Sleep/Stop mode function |
