Product Information


 

OKI Semiconductor offers a series of specialized ICs for Video and Display applications. These products and their specific functions are listed below:


Video Decoders and Encoders

OKI Semiconductor's video Decoder and Encoder lineup offers high quality with low cost LSI devices for converting video between the industry standard analog and digital formats. For converting analog video to digital video, OKI's video decoders include single 10-bit ADC devices for composite only video sources or a dual 10-bit ADC device supporting both Composite and S-Video input signals in NTSC, PAL or SECAM video formats. For digital video to analog video conversion, OKI's video encoders have six 11-bit DACs for high quality Composite, S-Video, Component or RGB outputs. Macrovision is also supported.

Part Number Device Type Functions Product Status
ML86V7665 Video Decoder NTSC / PAL / SECAM, 1 channel 10-bit ADC, YCbCr-BT656 output, Line Lock      New ! Active
ML86V7667 Video Decoder NTSC / PAL, 1 channel 10-bit ADC, YCbCr-BT656 output, Line Lock Active
ML86V7668A Video Decoder NTSC / PAL / SECAM, 2 channel 10-bit ADC, YCbCr-BT656 and RGB output, Line Lock Active
ML86V7655 Video Encoder NTSC / PAL, 6 channel 10-bit DAC, Interlace to Progressive and Progressive to Interlace Conversion Active
ML86V7656 Video Encoder NTSC / PAL, 6 channel 10-bit DAC, Interlace to Progressive and Progressive to Interlace Conversion, Macrovision support Active


 Video Noise-Reduction LSIs

OKI Semiconductor has industry-leading technology for reducing video noise caused by various conditions including weak signal, RF interference and CCD/CMOS sensor camera sources in low light environments. OKI’s unique video noise reduction HQNR (High Quality Noise Reduction) uses advanced motion detection and compensation techniques between lines, frames and fields with edge compensation to achieve unparalleled performance with minimal resolution deterioration. The filtering is done in the digital domain utilizing an internal DRAM-based FIFO memory providing a single chip solution.

Part Number FIFO Density Features Product Status
ML87V2103 3.9 Mb Field recursive noise reduction with built in interlace to progressive conversion NND
ML87V2105 5.6 Mb Adaptive frame recursive noise reduction using 4-1-1 sampling Active
ML87V2107 7.8 Mb Adaptive frame recursive noise reduction using 4-2-2 sampling with frame sychronizer Active
ML87V21071 7.8Mb Adaptive frame recursive noise reduction using 4-2-2 sampling with cross color canceller for higher quality Y/C separation Active
ML87V21072 7.8Mb Adaptive frame recursive noise reduction using 4-2-2 sampling CCD digital interface, Integrated Video Encoder      New ! Active
   NND: Not Recommended for New Design

LCD Graphic Display Controllers

OKI Semiconductor's LCD controller LSIs are designed for small and mid-size LCD monitors. They have integrated video decoders that are compatible with the three major video standards (NTSC, PAL, SECAM). OKI Semiconductor's video signal processing technology efficiently handles the necessary functions such as scaler, on-screen display (OSD) and I/P conversion providing the highest quality video on mid and small size LCD monitors without the need for an external large-capacity memories. They are compliant to ISO/TS16949 and offer high reliability for use in a wide range of temperature environments including surveillance display monitors, automotive LCD display for in car navigation systems, automotive entertainment systems and back-up cameras.

Part Number Device Type Features Product Status
ML86V8207 LCD Controller/Video Decoder Color TFT, QVGA-VGA resolution, Video Decoder supports NTSC/PAL/SECAM with 3 channel 10-bit ADC, Scaler, On-Screen Display (OSD) and Timing Controller (T-CON)      New ! Active
ML86V8208 LCD Controller/Video Decoderr Color TFT, QVGA-VGA resolution, Video Decoder supports NTSC/PAL/SECAM with 3 channel 10-bit ADC, Scaler and On-Screen Display (OSD) Active
ML86V8209 LCD Controller/Video Decoder Color TFT, WVGA-XGA resolution, Video Decoder supports NTSC/PAL/SECAM with 3 channel 10-bit ADC, Scaler, On-Screen Display (OSD), Timing Controller (T-CON) and Picture-In-Picture      New ! Active
   

MPEG-4 Encoder LSI

The ML86410 is an LSI that encodes YUV (YCbCr) digital video signals into MPEG-4 Simple Profile or Advanced Simple Profile data streams in real time. OKI Semiconductor's proprietary algorithm implements unique high speed/quality motion search techniques and encoding rate control into a dedicated hardware accelerator providing the highest quality MPEG-4 video available. The high quality video is maintained even with fast movement or at low bit rates due to its complex movement detection abilities and precise control of the encoded data. Our LSI offers lower power consumption and significant cost reduction over other solutions including DSP based systems. It is ideal for use in remote webcam and security applications.

Part Number Device Type Features Product Status
ML86410 MPEG-4 Encoder MPEG-4 Simple Profile/Advanced Simple Profile, QVGA/VGA (progressive) YCbCr 8bit 4:2:2+Sync, NTSC/PAL (interlace) ITU-R BT.656, Variable Bit Rate or Constant Bit Rate encoding from 8Kbs to 6Mbs Active
   

Audio Delay Processor

OKI Semiconductor's Audio Delay Processor ML87V5002 is an audio delay LSI with embedded 2MB DRAM for eliminating the “Lip Sync” problems associated with new generation display technologies. It functions as a delay line for multi-channel (up to 7.1 channels) audio applications such as LCD-TV, PDP, Wireless TV, Home Theater, High-end TV and DVD players. It provides a simple low cost solution for audio delay adjustment in AV systems.

Part Number Device Type Features Product Status
ML87V5002 Audio Delay Processor 8 channel capacity; embedded 2MB DRAM; Time delay of each channel can be set independently with fine granularity for accurate tuning; Automatic detection of input sampling frequency/data length or manual setting; and I2C bus control. Active
   

Video FIFOs

OKI Semiconductor's high density FIFO memories offer the best solution for video frame-buffer applications such as LCD TVs to speed up the LCD response using overdrive for CRT quality.

Part Number Features Product Status
MS81V26000 1.1 M x 24-bit, 83 MHz asynchronous R/W, panel sizes up to 1366 pixels x 768 lines, Cascadable Obsolete
MS81V32322 1.1 M x 32-bit, 143 & 150 MHz asynchronous R/W, panel sizes up to 1366 pixels x 768 lines, Cascadable Active