How do I use Teraterm or Hyperterm with the ML67Q4003, ML67Q5003 Serial Flash Write Utility?
Descriptive Answer:
The ML67Q4002/3, ML67Q5002/3 Serial Flash Write utility supports using both the Hyperterm and Teraterm setups.
After sending the !Zero.dat file 'Ready' should appear on the terminal window. The !Zero.dat file is available on the CD supplied with the CPU board. Downloading !Zero.dat synchronizes the baud rate of the CPU board to that of the terminal program.
The user can now download and run their application program (Intel32 Hex format)
Teraterm is much faster and shows progress on downloads. Hyperterm is slower and does not show status of download.
Teraterm can be downloaded at www.tucows.com or http://hp.vector.co.jp/authors/VA002416/teraterm.html
| » | Set the target board switch settings as per readme.txt file on the CD supplied with the board. Disconnect JTAG cable if present. |
| » | Connect the serial port on the PC to the UART port of the target board with a 'straight' serial cable. |
| » | Set the serial port terminal software as follows - Baud rate = 38400, 8bits, no parity, 1 stop bit, flow control Xon/Xoff. |
| » | Reset the target board. |
| » | Send intel32 .hex formatted file from the PC to the target board. On Hyperterm use Transfer->TextFile option to send for !Zero.dat and <user_prog.hex> files. |
| » | On Teraterm use File->Send File option. Select the binary option for !Zero.dat, deselect for <user_prog.hex> file |
After sending the !Zero.dat file 'Ready' should appear on the terminal window. The !Zero.dat file is available on the CD supplied with the CPU board. Downloading !Zero.dat synchronizes the baud rate of the CPU board to that of the terminal program.
The user can now download and run their application program (Intel32 Hex format)
Teraterm is much faster and shows progress on downloads. Hyperterm is slower and does not show status of download.
Teraterm can be downloaded at www.tucows.com or http://hp.vector.co.jp/authors/VA002416/teraterm.html
